La Crosse Technology BC-700 Alpha Power Battery Charger
Manufacturer: La Crosse Technology
Brand: La Crosse Technology
The La Crosse Technology BC700 Alpha Power Battery Charger has four modes and charges all NiCd and NiMH AA and AAA rechargeable batteries. The four modes include charge, discharge (discharges the batteries and then recharges them), recharge (discharges and recharges up to 20 times to bring old batteries back to life) and test (displays the battery capacity). BC-700 Battery Charger " Features: â€¢ All modes automatically default to 200 mA charge on the BC-700 Battery charger â€¢ Charge both AA and AAA rechargeable batteries simultaneously and will charge all Low-Discharge batteries. Sanyo Eneloop, Uniross Hybrio, Nexcell EnergyOn, Accupower Acculoop and other future low discharge batteries. â€¢ Hhas Four independent channels - Charges 1, 2, 3 , or 4 rechargeable batteries at a time. â€¢ Overheat detection to protect over-charging and LCD shows capacity for each battery when charging is complete â€¢ Charge Mode - allows a range of user selectable milliamp settings from 200 to 700 for faster charging times. Within 4 seconds after rechargeable batteries are inserted charging automatically begins at 200mA, or you may select 500, or 700mA charge rates for faster charging times. â€¢ Discharge Mode - reduces memory effect by discharging rechargeable battery completely before recharging to full capacity. User selectable. â€¢ Refresh Mode - discharges and recharges up to 20 cycles or until rechargeable battery is refreshed to full capacity. User Selectable. â€¢ Test Mode- First charges the rechargeable battery to full capacity, then discharges completely to measure rechargeable battery capacity for display in mAh or Ah, and then recharges each rechargeable battery to full battery capacity. â€¢ UL approved, BC 700 charger also has safeguards that sense rechargeable battery polarity, rechargeable battery temperature and defective rechargeable batteries. â€¢ World Voltage capable - Operates on 100~240V AC Input.
This Power Sweep electric blower is the perfect blower for clearing leaves and debris from sidewalks, decks, and driveways. This blower generates powerful air speed of up to 160 mph at 155 CFM. At only 4.6 pounds, the Power Sweep is easy to use and very lightweight.Dimensions: Measures 16.5" wide by 7.9" long by 11.8" tall; 5.2 poundsGenerates powerful air speed of 160 mphLightweight and easy to use at only 4.6-pounds2-speed air control for greater versatilityPerfect for clearing leaves and debris from sidewalks, deck and driveways
BLACK+DECKER AF-100-3ZP 30ft 0.065" Line String Trimmer Replacement Spool, 3-Pack
Manufacturer: Black & Decker
The BLACK+DECKER string trimmer Auto Feed System (AFS) Replacement Spool eases the tedious work of hand-winding spools. Designed for use with Black & Decker auto feed string trimmers, the 30-foot factory-wound replacement spool features a .065-inch diameter line utilizes centrifugal force to automatically feed the cutting string while eliminating bumps and hitches. The AFS replacement spool is compatible with most AFS BLACK+DECKER string trimmers including: GH400, GH500, GH600, GH610, GH900, GH912, ST6600, ST7000, ST7700, CST1000, CST1200, CST2000, MTC220, MTE912, NST2018, NST1118, NST2118, LST220, LST300, LST400, LST420, LST136W The BLACK+DECKER AF-100-3ZP String Trimmer Replacement Spool 3-pack erases the tedious work of hand-winding spools. Designed for use with BLACK+DECKER auto feed string trimmers, the 30-foot factory-wound replacement spools feature a .065-inch diameter line that utilizes centrifugal force to automatically feed the cutting string while eliminating bumps and hitches. The AFS replacement spools are compatible with the following BLACK+DECKER string trimmers: #GH400, #GH500, #GH600, #ST6600, #ST7000, #CST1000, #CST2000, #NST2018.
Hydrofarm T5 Grow Light System for Seed / Plant with Stand, 2-Foot
Manufacturer: Hydrofarm, Inc.
The 2 ft wide Jump Start T5 Grow Light System is ideal for seedlings, cuttings, flowers and house plants. The super efficient T5 lights help you grow faster by providing 15-20% more lumens than traditional grow lights. It features a simple toggle clamp for easy lamp height adjustment, and the fixture has an internal reflective finish that directs more light to plants. Ideal for African Violets, orchids, flowering bulbs, vegetables, seedlings and cuttings. Super easy assembly.
DESIGN of the CANNON SPRAYER -- PRESSURE Vs VOLUME (Please Read !!!!) The nozzle designed to find a good balance between the VOLUME (FLOW) & PRESSURE of water emanated. We designed it to be "GENTLE" enough to water your plants, and "STRONG" enough to clean most home/auto/garden objects. Too much VOLUME (FLOW) in the "Mist" position (Left Most Position) can ruin your plants, and is messy. Too much VOLUME (FLOW) in the "Jet Stream" (Right Most Position) position results in "lower" pressure (Yes, More Volume ---> Lower Pressure.) So, as per the design, we slightly restricted the VOLUME (FLOW) in both directions, to achieve this balance! HERE's WHAT MAKES THE CANNON SPRAYER DIFFERENT 1) NOZZLE BUILD: Rough, Tough, & Durable 2) LEAK PROOF: 2-O-Rings + 1 Washer built in 3) DESIGN/VERSATILITY: Fine Mist(Flowers) to Cone(Garden/Farm) to Laser Jet Stream (Deck/Auto) 4) LUBRICANT: Only company in America to apply "lubricant" at factory 5) WATER SHUT-OFF through TRIGGER 6) PRESSURE/VOLUME ADJUST-ABILITY through TRIGGER 7) DIGITAL GARDENING/AUTO LIBRARY & LIFETIME MEMBERSHIP - Downloadable from our Website (Please Note: No Physical Goods Shipped) QUALITY MATERIALS The CANNON is "designed" in the USA (Houston, Texas) with parts "sourced" from China and two other South East Asian countries, and "assembled" in China and USA. It is made of "Cast Iron" "Stainless Iron" and "Brass" -- China is the world's largest iron producer and our experience has been that some of the "best" quality of iron comes from there, and was one of main factors in sourcing some of the main material from China.
Most spills occur tipping a normal can to get the spout into the tank opening before the liquid comes out, or removing the spout from the target vessel before overflowing. The No-Spill spout is fully user controlled so you tip the can vertical, insert the spout into the vessel opening, then press the button to begin and control pouring. To stop pouring simply release the button. Practically eliminates spills and overflows. The only Spill-Proof spout with thumb button control that does not push down on your tank's filler neck to pour. More control, fewer tip-overs of your small equipment. The fastest pouring Spill-Proof nozzle available. At up to 3 gal/min, compare to other brands at 1.5 to 2.0 gal/min. Autostop removable nozzle, single opening for filling & pouring, treated can body for low permeation. Fills equipment without the need to press down on the tank opening. 6-inch Flex Spout Extension (sold separately) allows filling of on-road vehicles, boats and many other hard to reach tank openings. No-Spill Gasoline cans are tested and certified to ASTM F-85299 Standard Specification for Portable Gasoline Containers for Consumer Use and our Diesel & Kerosene cans are tested and certified to ASTM F-97602 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use.
Manufacturer: Bounty Hunter
Brand: Bounty Hunter
The stylish Gold Digger Metal detector will detect all kinds of metal from iron relics, coins and household items to precious metals like silver and gold. For more privacy when treasure seeking, the Gold Digger comes complete with headphones and 1/8â€ headphone jack for immediate use. Motion all-metal mode for detecting all types of metal Requires 2 9-volt Alkaline batteries (not included). Find coins, lost silver and gold jewelry and perhaps even pieces of history with the Bounty Hunter Gold Digger Metal Detector. It identifies coin-size objects up to 6" underground, and senses larger items up to 2' deep. Features automatic tuning and ground balance as well as a treasure meter and sensitivity control to hone in on precious metals. A trash eliminator prevents the machine from detecting undesirable items like nails or cans. Includes headphones and a 1/8" jack. Made in USA. 5Hx8Wx20L".
Most spills occur tipping a normal can to get the spout into the tank opening before the liquid comes out, or removing the spout from the target vessel before overflowing. The No-Spill spout is fully user controlled so you tip the can vertical, insert the spout into the vessel opening, then press the button to begin and control pouring. To stop pouring simply release the button. Practically eliminates spills and overflows. The only Spill-Proof spout with thumb button control that does not push down on your tank's filler neck to pour. More control, fewer tip-overs of your small equipment. The fastest pouring Spill-Proof nozzle available. At up to 3 gal/min, compare to other brands at 1.5 to 2.0 gal/min. Meets California Air Resources Board requirements for sale or use in California. Autostop removable nozzle, single opening for filling & pouring, treated can body for low permeation. Rear handle for pouring makes it the most user friendly CARB compliant 5 gallon can available. 6-inch Flex Spout Extension (sold separately) allows filling of on-road vehicles, boats and many other hard to reach tank openings. No-Spill Gasoline cans are tested and certified to ASTM F-85299 Standard Specification for Portable Gasoline Containers for Consumer Use and our Diesel & Kerosene cans are tested and certified to ASTM F-97602 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use. 5 Gallon CARB cans feature rear handle for well balanced pouring. Puts the can into the perfect position for pressing the thumb button.
Jump Start MTPRTC, Digital ETL-Certified Heat Mat Thermostat for Seed Germination, Reptiles and Brewing
"Hydrofarm's Jump Start Heat Mat Thermostat controls the temperature of heat mats by providing constant optimum temperature for plants, seedlings and cuttings. It is ideal for maintaing root zone/rooting temperatures in a tray and dome. Easy plug-in operation with LED indicator light, digital temperature selection, and three-prong ground plug. Controllable range from 68 to 108 degrees Fahrenheit. Includes temperature probe with 6' cord. Choice of Fahrenheit or Celsius digital readout. Heat mats are not just for gardening anymore! They are very useful for providing consistent, controllable heating for other hobbies including reptile and arachnid keeping (heating for enclosures and terrariums), homebrewing (maintaining of fermentation temperatures), and more. With this thermostat, you can easily expand any heat mat's functionality so that it provides the precise level of warmth your pets and projects require to flourish. The ability to dial in and maintain your preferred temperature means you can rest assured and no longer need to constantly monitor temperature, whether in colder or warmer environments. The Heat Mat Thermostat is the only ETL-certified heat mat thermostat on the market. ETL (Intertek) is a respected inspection laboratory which specializes in product safety testing. ETL certification is proof that a product complies with widely-accepted safety standards. The Jump Start Heat Mat Thermostat is compatible with all heat mats, and is an optional accessory for Hydrofarm Seedling Heat Mats. "